Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Stap 1 vertalen

Stap 1
Before doing anything, ensure that the mixer is not plugged in! Then, remove the cover from the high speed attachment. If you don't have this cover, then the low speed attachments will not work anyway, as the cover engages the clutch when it is latched on. Before doing anything, ensure that the mixer is not plugged in! Then, remove the cover from the high speed attachment. If you don't have this cover, then the low speed attachments will not work anyway, as the cover engages the clutch when it is latched on.
  • Before doing anything, ensure that the mixer is not plugged in! Then, remove the cover from the high speed attachment. If you don't have this cover, then the low speed attachments will not work anyway, as the cover engages the clutch when it is latched on.

Ziehe vor Beginn der Reparatur den Netzstecker.

Entferne den Deckel vom Hochgeschwindigkeitsanschluss. Wenn dieser Deckel fehlt, läuft auch der Anschluss mit niedrigen Drehzahlen nicht, weil er von diesem Deckel angekuppelt wird.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.