Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Stap 7
Next, remove the plastic cover on the bottom of the gearbox. At this point, old crumbs will be getting everywhere. This is held on by four screws, which are removed in the first picture. At this point, you also need to pull the plastic cover off the lever at the front of the mixer. You now have access to the lower plastic cover - best to give this a wash along with the felt. (picture 2) Behold the beauty of the Kenwood gearbox (picture 3). Best not to wash this, but remove the 6 screws to gain access.
Remove/Service The Gearbox Part 2/3
  • Next, remove the plastic cover on the bottom of the gearbox. At this point, old crumbs will be getting everywhere. This is held on by four screws, which are removed in the first picture. At this point, you also need to pull the plastic cover off the lever at the front of the mixer.

  • You now have access to the lower plastic cover - best to give this a wash along with the felt. (picture 2)

  • Behold the beauty of the Kenwood gearbox (picture 3). Best not to wash this, but remove the 6 screws to gain access.

Entferne den Kunstoffdeckel unten am Getriebe. Vermutlich fallen dann jede Menge alter Krümel heraus. Im ersten Bild siehst du, an welchen Stellen die Schrauben sitzen. Ziehe den Deckel über den Plastikhebel vorne am Gerät.

Jetzt kannst du an die untere Kunstoffabdeckung gelangen. Eine gute Gelegenheit, den Deckel und den Antriebsriemen gut zu säubern.

Schaue dir an, wie schön das Kenwood -Getriebe ist (Bild 3) Tauche es nicht in Wasser ein, entferne aber die 6 Schrauben, um hineinzukommen.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.