Ga door naar hoofdinhoud
Stap 15
Insert the cut/stripped speaker wires on each side and use a Philips #2 screwdriver to secure them in place. Make sure you connect the Positive wire to the Positive terminal, and the Negative wire to the Negative terminal. Make sure you connect the Positive wire to the Positive terminal, and the Negative wire to the Negative terminal.
  • Insert the cut/stripped speaker wires on each side and use a Philips #2 screwdriver to secure them in place.

  • Make sure you connect the Positive wire to the Positive terminal, and the Negative wire to the Negative terminal.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.