Ga door naar hoofdinhoud
Engels
Nederlands

Stap 3 vertalen

Stap 3
You will need to desolder the fire button cables from the board. Pry the case open but watch for the spring. There is also a rubber bung that sits beneath the black rocker shaft. Desolder the cables from the main joystick board and remove all of the components.
  • You will need to desolder the fire button cables from the board.

  • Pry the case open but watch for the spring. There is also a rubber bung that sits beneath the black rocker shaft.

  • Desolder the cables from the main joystick board and remove all of the components.

  • Now you are ready to clean all of the joystick components and reassemble.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.