Ga door naar hoofdinhoud
Engels
Nederlands
Stap 2
The joystick is held together by five phillips head screws. One screw is located on the handle and the remaining four are under the base. Once the screws have been removed you can pry the case apart using a flat head screw driver. Just be careful with the base as it is spring loaded and it can fly apart quite easily. Once the screws have been removed you can pry the case apart using a flat head screw driver. Just be careful with the base as it is spring loaded and it can fly apart quite easily.
  • The joystick is held together by five phillips head screws. One screw is located on the handle and the remaining four are under the base.

  • Once the screws have been removed you can pry the case apart using a flat head screw driver. Just be careful with the base as it is spring loaded and it can fly apart quite easily.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.