Ga door naar hoofdinhoud

iPhone 4S Logic Board Replacement

Waarschuwing: Je bewerkt nu een vooraf vereiste handleiding van de handleiding die je net bekeek. Alle wijzigingen die je hierin maakt, beïnvloeden alle 14 handleidingen die deze stap bevatten.

Engels
Nederlands

Stap 1 vertalen

Stap 1
iPhone 4S Logic Board Replacement: stap 0, afbeelding 1 van 2 iPhone 4S Logic Board Replacement: stap 0, afbeelding 2 van 2
  • Remove the five cables near the top of the logic board in the following order:

  • Headphone jack/volume button cable

  • Front facing camera cable

  • Digitizer cable

  • Display data cable

  • Power button cable (located underneath the headphone jack/volume button cable as shown in the second picture.)

  • To disconnect the cables, use the edge of a plastic opening tool to gently lift their connectors up and out of the sockets on the logic board.

  • Be careful not to break any of the small and delicate surface mount components as you disconnect the cables.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.