Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands
Stap 8
In this step, you will heat and remove the plastic frame near the digitizer cable. Do not directly heat this ribbon cable, as it is extremely thin and sensitive to heat. Use a heat gun to soften the adhesive next to both sides of the digitizer cable, being careful not to melt the cable.
  • In this step, you will heat and remove the plastic frame near the digitizer cable. Do not directly heat this ribbon cable, as it is extremely thin and sensitive to heat.

  • Use a heat gun to soften the adhesive next to both sides of the digitizer cable, being careful not to melt the cable.

  • Pry the final section of the plastic display frame away from the front glass.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.