Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 9 handleidingen die deze stap bevatten.

Stap 3 vertalen

Stap 3
Wedge a plastic opening tool into the case-splittings and pull down to crack open the casing near the following buttons: Share button Options button
  • Wedge a plastic opening tool into the case-splittings and pull down to crack open the casing near the following buttons:

  • Share button

  • Options button

  • Split the plastic covers of the controller apart, taking note that they will still be attached by circuit board ribbons.

  • Three small pieces are often released from the framework. To prevent loss, maintain a controlled work field.

  • 2 Trigger Springs

  • 1 Grey Reset Button Extension

将一个撬棒楔入壳体来打开以下按钮附近的卡扣:

Share键

Options键

将控制器塑料外壳分开,注意两者依然通过排线连接。

3个小模块经常从框架中跑出,为了避免损失,请保持工作台的干净整洁。

2个触发弹簧

1个灰色复位按钮扩展

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.