Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 4 handleidingen die deze stap bevatten.

Stap 3
Use the point of a spudger to gently pry between the speaker and the rear case, lifting the speaker enough to grab with your fingers. Do not attempt to pry the speaker entirely out of the case, you may break plastic tabs holding the speaker in place.
  • Use the point of a spudger to gently pry between the speaker and the rear case, lifting the speaker enough to grab with your fingers.

  • Do not attempt to pry the speaker entirely out of the case, you may break plastic tabs holding the speaker in place.

Usa l'estremità a punta di uno spudger per far leva con delicatezza tra l'altoparlante e il case posteriore, sollevando l'altoparlante quanto basta per poterlo afferrare con le dita.

Non cercare di staccare completamente dal case l'altoparlante, perché potresti rompere le linguette di plastica che lo tengono in posizione.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.