Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands
Stap 7
Make sure you note the position of the positive and negative terminals. Start by removing a bit of solder with the pump. Separate the cables. It may require some force, so be careful not to break the board.
  • Make sure you note the position of the positive and negative terminals.

  • Start by removing a bit of solder with the pump.

  • Separate the cables. It may require some force, so be careful not to break the board.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.