Repareer je spullen

Recht op reparatie

Winkel

Terug naar de handleiding
Engels
Nederlands
Stap 18
Remove the two black 3 mm Phillips screws securing the logic board to the inner case. While holding the ground arm stationary with one hand, use a pair of tweezers to lift the ground spring off its plastic post on the inner case.

  • Remove the two black 3 mm Phillips screws securing the logic board to the inner case.

  • While holding the ground arm stationary with one hand, use a pair of tweezers to lift the ground spring off its plastic post on the inner case.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.