Ga door naar hoofdinhoud
Engels
Nederlands
Stap 17
Remove the single 6.3 mm Phillips screw securing the upper half of the battery compartment to the Newton. While lightly lifting the upper half of the battery compartment, use the edge of a plastic opening tool to release the five clips along its outer edge. Lift the upper half of the battery compartment and gently lay it on the logic board.
  • Remove the single 6.3 mm Phillips screw securing the upper half of the battery compartment to the Newton.

  • While lightly lifting the upper half of the battery compartment, use the edge of a plastic opening tool to release the five clips along its outer edge.

  • Lift the upper half of the battery compartment and gently lay it on the logic board.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.