Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 15 handleidingen die deze stap bevatten.
Stap 1 vertalen
Stap 1
-
Disconnect the multicolor connector from the upper right corner of the logic board.
-
Remove the following 2 screws:
-
One Phillips buried under the cable to the right of the fan area.
-
One Phillips holding down the display data cable on the left side of the computer.
Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.