Ga door naar hoofdinhoud
Engels
Nederlands
Stap 2
Remove the three screws holding metal plate, one on the top in the middle, and two at the bottom by the main cable.
  • Remove the three screws holding metal plate, one on the top in the middle, and two at the bottom by the main cable.

  • Push the metal plate towards bottom of the monitor to release it from clips and remove.

  • After popping off (removing) metal plate, you can now see all inner components, where the USB connector is on left side.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.