Ga door naar hoofdinhoud
Stap 8
Time to remove the iron part. Pull out the fan wire. If you need you can use a flat screwdriver, paying attention not to break it. It's time to detach the SATA adapters with the fan, so you can contemplate the main circuit.
  • Time to remove the iron part.

  • Pull out the fan wire. If you need you can use a flat screwdriver, paying attention not to break it.

  • It's time to detach the SATA adapters with the fan, so you can contemplate the main circuit.

  • Don't remove the battery as this could lead to time loss, some basic (board-level) settings, and unwanted resets.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.