Ga door naar hoofdinhoud
Stap 14
Remove the three Phillips screws securing both microphones to the outer case. The microphone assembly on the left also houses a small speaker for audio during video playback. It connects to the board via two spring-loaded pressure contacts. Lift both microphones off the inner surface of the outer case.
  • Remove the three Phillips screws securing both microphones to the outer case.

  • The microphone assembly on the left also houses a small speaker for audio during video playback. It connects to the board via two spring-loaded pressure contacts.

  • Lift both microphones off the inner surface of the outer case.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.