Ga door naar hoofdinhoud
Stap 12
Carefully maneuver the logic board out of the outer case, minding the cables still connecting the two components. To gain more clearance, remove the small strip of black tape securing the USB ribbon cable to the battery bracket. Use a pair of tweezers to pull the USB ribbon cable connector away from its socket.
  • Carefully maneuver the logic board out of the outer case, minding the cables still connecting the two components.

  • To gain more clearance, remove the small strip of black tape securing the USB ribbon cable to the battery bracket.

  • Use a pair of tweezers to pull the USB ribbon cable connector away from its socket.

  • Pull the battery connector out of its socket on the logic board.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.