Ga door naar hoofdinhoud
Stap 8
Now it's time to replace the old circuit board with the new one. Push the two black wire's ends into the cable ports on the back panel of the casing.
  • Now it's time to replace the old circuit board with the new one.

  • Push the two black wire's ends into the cable ports on the back panel of the casing.

  • Solder the ends of the two red wires onto the small circuit board on the front panel of the device.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.