General Electric Bagel Switch 4 Slice Bottom Plate Replacement

Terug naar de handleiding

Engels

Nederlands

Vorige stap Volgende stap

Stap 6 vertalen

Stap 6

General Electric Bagel Switch 4 Slice Bottom Plate Replacement: stap 0, afbeelding 1 van 1

Now the bottom plate is in place. Put the (4) four screws that hold it on, back into where you removed them from. Use the screwdriver to do this.
Once these (4) screws have been tightened, in the correct holes, you have finished replacing the bottom plate.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.