Ga door naar hoofdinhoud
Engels
Nederlands
Stap 4
Hook the thread behind the small, bent arm where the needle attaches to the machine. Guide the thread, from front to back, through the eye of the needle, leaving a loose end of approximately 10 cm.
  • Hook the thread behind the small, bent arm where the needle attaches to the machine.

  • Guide the thread, from front to back, through the eye of the needle, leaving a loose end of approximately 10 cm.

  • If the end of your thread has frayed and you cannot guide it through the eye of the needle, snip off the frayed end and try again.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.