Ga door naar hoofdinhoud
Engels
Nederlands
Stap 3
At the top of the machine, lead the thread along the groove of the take-up lever. Once you've fed the thread into the crux of the take-up lever, pull the thread back down towards the presser foot. If you've threaded correctly, your thread should form a complete zigzag—first down, then up, then back down all the way to the presser foot.
  • At the top of the machine, lead the thread along the groove of the take-up lever.

  • Once you've fed the thread into the crux of the take-up lever, pull the thread back down towards the presser foot.

  • If you've threaded correctly, your thread should form a complete zigzag—first down, then up, then back down all the way to the presser foot.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.