Ga door naar hoofdinhoud
Engels
Nederlands

Stap 1 vertalen

Stap 1
Place a spool on the pin. Pull the thread from the spool straight out, following the length of the machine. Hook the thread under the eyelet on the outer edge of the machine. With one hand, hold the spool steady. Using the eyelet as a pivot, pull the string perpendicular with the other hand. Lay the thread into the slot, which bisects the top of the machine.
  • Place a spool on the pin. Pull the thread from the spool straight out, following the length of the machine.

  • Hook the thread under the eyelet on the outer edge of the machine.

  • With one hand, hold the spool steady. Using the eyelet as a pivot, pull the string perpendicular with the other hand. Lay the thread into the slot, which bisects the top of the machine.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.