Repareer je spullen Gemeenschap Winkel

Applicare una toppa termoadesiva

Terug naar de handleiding
Engels
Italiaans
Stap 3
Installing an Iron-on Patch: stap 0, afbeelding 1 van 2 Installing an Iron-on Patch: stap 0, afbeelding 2 van 2

  • Measure the length and width of the hole in your jeans, including any damaged area around the hole.

  • In our case the hole is about 1.5 inches by 2 inches.

Misurare la lunghezza e la larghezza dello strappo sui jeans, includendo anche la parte di tessuto rovinata attorno allo strappo.

Nel nostro caso lo strappo misura circa 3,5 x 5 cm.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.