Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Stap 3
Set your iron to the appropriate setting—in our case, nylon—and iron your patch fabric to smooth out any wrinkles. Position the template on the patch fabric, leaving about ¼ or ½ inch of extra fabric around the edges. Cut out the patch, leaving 1/4 or 1/2 inch of extra fabric around each side of the template.
  • Set your iron to the appropriate setting—in our case, nylon—and iron your patch fabric to smooth out any wrinkles.

  • Position the template on the patch fabric, leaving about ¼ or ½ inch of extra fabric around the edges.

  • Cut out the patch, leaving 1/4 or 1/2 inch of extra fabric around each side of the template.

素材(ここではナイロン)に適した温度で、あて布にアイロンをかけます。

あて布に型紙を置き、6~12ミリ幅の縫いしろを入れます。

6~12ミリ幅の縫いしろの幅を含めて生地を切り取ります。

[* black] Set your iron to the appropriate setting—in our case, nylon—and [guide|10273|ironguide|19461|iron your patch fabric] to smooth out any wrinkles.
[* black] Set your iron to the appropriate setting—in our case, nylon—and [guide|10273|ironguide|19461|iron your patch fabric] to smooth out any wrinkles.
[* black] Position the template on the patch fabric, leaving about ¼ or ½ inch of extra fabric around the edges.
[* black] Cut out the patch, leaving 1/4 or 1/2 inch of extra fabric around each side of the template.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.