Ga door naar hoofdinhoud
Step 10
Locate and remove the 3 black 5mm long screws and set them aside. They will have a 3.5 mm diameter head. Locate the four connectors holding the four ribbon cables.
  • Locate and remove the 3 black 5mm long screws and set them aside. They will have a 3.5 mm diameter head.

  • Locate the four connectors holding the four ribbon cables.

  • Slide the lock clips down for each connector (as in step 9) and slide each ribbon cable out.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.