Repareer je spullen Gemeenschap Winkel

Reemplazo del ensamblaje del panel frontal del iPhone 5s

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 32 handleidingen die deze stap bevatten.

Terug naar de handleiding
Engels
Spaans
Stap 4
iPhone 5s Front Panel Assembly Replacement, Anti-Clamp instructions: stap 0, afbeelding 1 van 3 iPhone 5s Front Panel Assembly Replacement, Anti-Clamp instructions: stap 0, afbeelding 2 van 3 iPhone 5s Front Panel Assembly Replacement, Anti-Clamp instructions: stap 0, afbeelding 3 van 3
Anti-Clamp instructions

  • The next two steps demonstrate the Anti-Clamp, a tool we designed to make the opening procedure easier. If you aren't using the Anti-Clamp, skip down two steps for an alternate method.

  • For complete instructions on how to use the Anti-Clamp, check out this guide.

  • Pull the blue handle backwards to unlock the Anti-Clamp's arms.

  • Slide the arms over either the left or right edge of your iPhone.

  • Position the suction cups near the bottom edge of the iPhone just above the home button—one on the front, and one on the back.

  • Squeeze the cups together to apply suction to the desired area.

  • If the surface of your iPhone is too slippery for the Anti-Clamp to hold onto, you can use the included tape pad to create a grippier surface.

Instrucciones Anti-Clamp

Los siguientes dos pasos demuestran el Anti-Clamp, una herramienta que diseñamos para facilitar el procedimiento de apertura. Si no estás utilizando Anti-Clamp, salta dos pasos hacia abajo para obtener un método alternativo.

Para obtener instrucciones completas sobre cómo usar Anti-Clamp, consulta esta guía.

Tira de la manija azul hacia atrás para desbloquear los brazos del Anti-Clamp.

Desliza los brazos sobre el borde izquierdo o derecho de tu iPhone.

Coloca las ventosas cerca del borde inferior del iPhone, justo encima del botón de inicio (una en el frente y otra en la parte posterior).

Junta las ventosas para que apliquen succión sobre la zona deseada.

Si la superficie de tu dispositivo te resulta demasiado resbaladiza para que el Anti-Clamp la sujete, puedes usar la cinta de embalaje incluida para crear una superficie más adherente.

[title] Anti-Clamp instructions
-[* icon_note] The next two steps demonstrate the Anti-Clamp, a tool we designed to make the opening procedure easier. ***If you aren't using the Anti-Clamp, skip down two steps for an alternate method.***
+[* icon_note] The next two steps demonstrate the [product|IF145-513|Anti-Clamp], a tool we designed to make the opening procedure easier. ***If you aren't using the Anti-Clamp, skip down two steps for an alternate method.***
[* icon_note] For complete instructions on how to use the Anti-Clamp, [guide|152309|check out this guide|new_window=true].
[* black] Pull the blue handle backwards to unlock the Anti-Clamp's arms.
[* black] Slide the arms over either the left or right edge of your iPhone.
[* black] Position the suction cups near the bottom edge of the iPhone just above the home button—one on the front, and one on the back.
[* black] Squeeze the cups together to apply suction to the desired area.
[* icon_note] If the surface of your iPhone is too slippery for the Anti-Clamp to hold onto, you can [guide|159595|use the included tape pad|new_window=true] to create a grippier surface.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.