Repareer je spullen Gemeenschap Winkel

iPhone 5s 前面板组件更换

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 32 handleidingen die deze stap bevatten.

Terug naar de handleiding
Engels
Chinees
Stap 5
iPhone 5s Front Panel Assembly Replacement: stap 0, afbeelding 1 van 3 iPhone 5s Front Panel Assembly Replacement: stap 0, afbeelding 2 van 3 iPhone 5s Front Panel Assembly Replacement: stap 0, afbeelding 3 van 3

  • Pull the blue handle forwards to lock the arms.

  • Turn the handle clockwise 360 degrees or until the cups start to stretch.

  • Make sure the suction cups remain aligned with each other. If they begin to slip out of alignment, loosen the suction cups slightly and realign the arms.

  • Insert an opening pick under the screen when the Anti-Clamp creates a large enough gap.

  • If the Anti-Clamp doesn't create a sufficient gap, rotate the handle a quarter turn.

  • Don't crank more than a quarter turn at a time and wait a few seconds between turns. Let the Anti-Clamp and time do the work for you.

  • Skip the next two steps.

将蓝色手柄向前拉，锁定双臂。

顺时针旋转手柄 360 度，直到吸盘开始拉伸。

确保吸盘相互对齐。如果吸盘开始滑脱，请稍稍松开吸盘并重新对齐支臂。

当反向钳产生足够大的间隙时，将撬片插入屏幕下方。

如果反向钳没有形成足够的间隙，将手柄旋转四分之一圈。

每次摇动不要超过四分之一圈，每圈之间等待几秒钟。把工作交给反向钳和时间来完成。

跳过接下来的两个步骤。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.