Repareer je spullen Gemeenschap Winkel

iPhone 5s 전면 패널 어셈블리 교체

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 32 handleidingen die deze stap bevatten.

Terug naar de handleiding
Engels
Koreaans
Stap 5
iPhone 5s Front Panel Assembly Replacement: stap 0, afbeelding 1 van 3 iPhone 5s Front Panel Assembly Replacement: stap 0, afbeelding 2 van 3 iPhone 5s Front Panel Assembly Replacement: stap 0, afbeelding 3 van 3

  • Pull the blue handle forwards to lock the arms.

  • Turn the handle clockwise 360 degrees or until the cups start to stretch.

  • Make sure the suction cups remain aligned with each other. If they begin to slip out of alignment, loosen the suction cups slightly and realign the arms.

  • Insert an opening pick under the screen when the Anti-Clamp creates a large enough gap.

  • If the Anti-Clamp doesn't create a sufficient gap, rotate the handle a quarter turn.

  • Don't crank more than a quarter turn at a time and wait a few seconds between turns. Let the Anti-Clamp and time do the work for you.

  • Skip the next two steps.

파란색 손잡이를 앞으로 당겨 팔을 고정하세요.

손잡이를 시계 방향으로 360도 돌리거나 컵이 늘어나기 시작할 때까지 돌리세요.

흡입 컵이 서로 정렬된 상태를 유지하는지 확인하세요. 정렬에서 벗어나기 시작하면 흡입 컵을 약간 풀고 팔을 다시 정렬하세요.

안티-클램프가 충분히 큰 틈을 만들면 스크린 밑으로 여는 픽을 끼우세요.

안티-클램프가 충분한 틈을 만들지 못하면 핸들을 1/4 바퀴 돌리세요.

한 번에 1/4 바퀴 이상 돌리지 말고 매번 돌릴 때마다 몇 초 정도 기다리세요. 안티-클램프와 시간에 맡기세요.

다음 두 단계는 건너뛰세요.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.