Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 2 handleidingen die deze stap bevatten.
Stap 1 vertalen
Stap 1
-
Underneath the left I/F terminal cap, remove the following screw:
-
M1.7x5.5mm JIS #000 screw
-
Using a plastic opening pick, peel off the front name plate.
-
Underneath where the name plate was, remove the following screw:
-
One M1.7x5.5mm Phillips #000 screw
-
Pull off the I/F terminal cover.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.