Skip to main content
Step 9
Finally - a full look at the motherboard! Some connectors left, but we're getting there To start, remove the 2 screws at the bottom of the motherboard holding it in Remove the snap connector that connects to the motherboard by pulling straight up on the tab
  • Finally - a full look at the motherboard! Some connectors left, but we're getting there

  • To start, remove the 2 screws at the bottom of the motherboard holding it in

  • Remove the snap connector that connects to the motherboard by pulling straight up on the tab

  • On the far right of the motherboard, there is a right-facing connector that runs to the wireless card. Wiggle the connector out, to the right.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.