Waarschuwing: Je bewerkt nu een vooraf vereiste handleiding van de handleiding die je net bekeek. Alle wijzigingen die je hierin maakt, beïnvloeden alle 2 handleidingen die deze stap bevatten.
Stap 1 vertalen
Stap 1
-
Make sure the back of the phone is facing upwards like the image on the left.
-
Remove all three screws highlighted in the image by turning them counter-clockwise using the T6 Torx Screwdriver.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.