Ga door naar hoofdinhoud
Engels
Nederlands

Stap 6 vertalen

Stap 6
Insert the tip of a spudger into the opening located near the top right corner of the microphone assembly. Carefully pry the spudger upwards against the rear case to dislodge the microphone assembly from the adhesive securing it to the rear case. Lift and remove the microphone assembly from the iPad.
  • Insert the tip of a spudger into the opening located near the top right corner of the microphone assembly.

  • Carefully pry the spudger upwards against the rear case to dislodge the microphone assembly from the adhesive securing it to the rear case.

  • Lift and remove the microphone assembly from the iPad.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.