Waarschuwing: Je bewerkt nu een vooraf vereiste handleiding van de handleiding die je net bekeek. Alle wijzigingen die je hierin maakt, beïnvloeden alle 6 handleidingen die deze stap bevatten.
Stap 1 vertalen
Stap 1
Pry up the heat sink
-
Insert the flat end of a spudger under the bend in the copper pipes, near the heat sink's bottom edge.
-
Use your spudger to pry up the heat sink, applying steady pressure to separate it from the thermal paste.
-
If the heat sink doesn't fully separate, use your spudger to pry up the bottom edge on the other side of the metal fins.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.