Steam Controller Trigger Mount Replacement

Terug naar de handleiding

Engels

Nederlands

Vorige stap Volgende stap

Stap 4 vertalen

Stap 4

Steam Controller Trigger Mount Replacement, Carefully remove board: stap 0, afbeelding 1 van 2

Steam Controller Trigger Mount Replacement, Carefully remove board: stap 0, afbeelding 2 van 2

Carefully remove board

Slowly pull up the printed circuit board from the bottom.
BE CAREFUL! There are two ribbon cables underneath attached to the trackpads. Pry up the board high enough to reach the ribbon cables, and gently pull them out with soft tweezers or your fingers.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.