Ga door naar hoofdinhoud
Engels
Nederlands
Stap 3
Tilt the bottom case slightly toward the trigger buttons to slide it off the top case Here is a view of the inside of the controller. Note the vibration motors having different counter weights. Remove the connector from the left motor (controller is positioned upside down, left controller will be shown right etc.)
  • Tilt the bottom case slightly toward the trigger buttons to slide it off the top case

  • Here is a view of the inside of the controller. Note the vibration motors having different counter weights.

  • Remove the connector from the left motor (controller is positioned upside down, left controller will be shown right etc.)

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.