Repareer je spullen Gemeenschap Winkel

如何读取智能烙铁触摸安全指示灯 LED

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 8 handleidingen die deze stap bevatten.

Terug naar de handleiding
Engels
Chinees

Stap 1 vertalen

Stap 1
How to Read the Smart Soldering Iron Touch-Safe Indicator LED, How to read the Touch-Safe Indicator LED: stap 0, afbeelding 1 van 3 How to Read the Smart Soldering Iron Touch-Safe Indicator LED, How to read the Touch-Safe Indicator LED: stap 0, afbeelding 2 van 3 How to Read the Smart Soldering Iron Touch-Safe Indicator LED, How to read the Touch-Safe Indicator LED: stap 0, afbeelding 3 van 3
How to read the Touch-Safe Indicator LED

  • The color of the Touch-Safe Indicator LED provides information about the status of the soldering iron tip. Note: the soldering iron grip is always safe to touch.

  • The LED only functions when the soldering iron is connected to a power source—so use caution when handling an unplugged iron if you don't know how hot it is.

  • Blue LED: The iron has cooled below 40 °C (100 °F), and the tip is safe to touch.

  • Purple LED: When pulsing, the iron is actively heating up or cooling down. When static, the iron is in Idle Mode. The iron tip is not safe to touch.

  • Orange LED: The iron has reached the set temperature and is ready to solder. The iron tip is not safe to touch.

如何读取触摸安全指示灯 LED

触摸安全指示灯 LED 的颜色提供有关烙铁头状态的信息。注意：烙铁手柄始终可以安全触摸。

只有当烙铁连接到电源时，LED 才会工作，因此如果您不知道烙铁有多热，请在处理拔下的烙铁时小心谨慎。

蓝色 LED ：烙铁已冷却至 40°C (100°F) 以下，烙铁头可以安全触摸。

紫色 LED：脉冲时，熨斗正在主动加热或冷却。静态时，烙铁处于 闲置模式。烙铁尖端 触摸不安全。

橙色 LED：烙铁已达到设定温度，准备焊接。烙铁头不安全，不能触摸。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.