Ga door naar hoofdinhoud
Stap 5
Unsnap the controller port cover and the rearmost I/O-cover by unsnapping the two snaps on the sides of each cover. Don't remove the controller panel yet. Then remove the heatsinks of the memory card slots (necessary step). Then remove the heatsinks of the memory card slots (necessary step).
  • Unsnap the controller port cover and the rearmost I/O-cover by unsnapping the two snaps on the sides of each cover. Don't remove the controller panel yet.

  • Then remove the heatsinks of the memory card slots (necessary step).

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.