Ga door naar hoofdinhoud

iPad Mini CDMA LCD Assembly Replacement

Waarschuwing: Je bewerkt nu een vooraf vereiste handleiding van de handleiding die je net bekeek. Alle wijzigingen die je hierin maakt, beïnvloeden alle 42 handleidingen die deze stap bevatten.

Engels
Nederlands
Stap 11
iPad Mini CDMA LCD Assembly Replacement: stap 0, afbeelding 1 van 3 iPad Mini CDMA LCD Assembly Replacement: stap 0, afbeelding 2 van 3 iPad Mini CDMA LCD Assembly Replacement: stap 0, afbeelding 3 van 3
  • Starting at the top right of the device, slide the spudger in between the LCD frame and metal backing plate, which will separate the adhesive as you push.

  • The goal is to separate the adhesive, not to pry the LCD up, so keep the pointed tip of the spudger as low as possible to prevent bending the LCD.

  • If inserting the spudger causes the corner of the LCD to bend up, repeat the steps with the guitar pick to further loosen the adhesive.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.