Ga door naar hoofdinhoud
Engels
Nederlands
Stap 22
Extract the bus cable with needle nose pliers by lifting the tab and pulling it away. If your computer doesn't power on, then check to make sure this cable is plugged in. Always lift tabs vertically to free cables.
Remove bus cable to Motherboard.
  • Extract the bus cable with needle nose pliers by lifting the tab and pulling it away.

  • If your computer doesn't power on, then check to make sure this cable is plugged in.

  • Always lift tabs vertically to free cables.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.