Repareer je spullen Gemeenschap Winkel

HP EliteBook x360 830 G7 Motherboard Replacement

Terug naar de handleiding
Engels
Nederlands
Stap 6
HP EliteBook x360 830 G7 Motherboard Replacement: stap 0, afbeelding 1 van 2 HP EliteBook x360 830 G7 Motherboard Replacement: stap 0, afbeelding 2 van 2

  • Use the point of a spudger to push on alternating sides of the speaker connector to "walk" it out of its socket.

  • Don't pull on the cables.

  • Disconnecting these cables is a two-step process.

  • Gently push the tip of a spudger under the metal buckle to unclip it, then swing it over the socket.

  • Hold the buckle and cable together and gently pull the connector straight out of its socket.

  • To reconnect, grip the cable and buckle together and insert the connector fully into its socket.

  • Aligning the connector can be tricky. Reposition it as necessary and don't try to force it into the socket, or you may damage both the connector and its socket.

  • Flip the buckle over the socket and use a spudger to press the buckle down until it clicks into place.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.