Ga door naar hoofdinhoud

Changement circuit imprimé du bouton de marche Kobo Libra Colour

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Stap 10
Kobo Libra Colour Power Button Board Replacement, Soften the interconnect cable adhesive: stap 0, afbeelding 1 van 3 Kobo Libra Colour Power Button Board Replacement, Soften the interconnect cable adhesive: stap 0, afbeelding 2 van 3 Kobo Libra Colour Power Button Board Replacement, Soften the interconnect cable adhesive: stap 0, afbeelding 3 van 3
Soften the interconnect cable adhesive
  • Apply a heated iOpener to the top edge of the eReader for 90 seconds to soften the adhesive under the interconnect cable.

  • Alternatively, you can use a hair dryer or a heat gun for 30 seconds.

Posez un iOpener chauffe sur le bord supérieur de la liseuse pendant 90 secondes pour ramollir l'adhésif sous la nappe d'interconnexion.

Vous pouvez également utiliser un sèche-cheveux ou un pistolet à air chaud pendant 30 secondes.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.