Ga door naar hoofdinhoud

ジグザグ縫いの継ぎあて方法

Stap 5
Zig-zag Patch: stap 0, afbeelding 1 van 3 Zig-zag Patch: stap 0, afbeelding 2 van 3 Zig-zag Patch: stap 0, afbeelding 3 van 3
  • Check that the rectangle of fabric is still laying flat, centered beneath the hole.

  • Lower the pressor foot.

  • Sew a straight line over the hole going about five stitches past the damage.

長方形のはぎれが穴の下に平に入っていることを確認します。

ミシンの押さえ金を下ろします。

穴の5ステッチほど先からまっすぐに縫います。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.