Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands
Stap 8
Use a spudger to pry the headphone jack off of the adhesive holding it to the rear case. Do not remove the headphone jack entirely; its ribbon cable is still soldered to the logic board assembly.
  • Use a spudger to pry the headphone jack off of the adhesive holding it to the rear case.

  • Do not remove the headphone jack entirely; its ribbon cable is still soldered to the logic board assembly.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.