Ga door naar hoofdinhoud
Engels
Nederlands
Stap 6
Use the pointed end of a spudger to pry the volume control button assembly away from the edge of the case. Do not remove the volume control button assembly from the device entirely; it is still connected to the logic board assembly by a soldered cable.
  • Use the pointed end of a spudger to pry the volume control button assembly away from the edge of the case.

  • Do not remove the volume control button assembly from the device entirely; it is still connected to the logic board assembly by a soldered cable.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.