Ga door naar hoofdinhoud
Engels
Nederlands
Stap 8
At this point, your new hard drive should be a clone of your existing drive and ready to install.
  • At this point, your new hard drive should be a clone of your existing drive and ready to install.

  • However, we recommend testing the cloned drive before physically swapping the drives. This can be done by attempting to boot from the new cloned drive through the USB enclosure.

  • Keep the enclosure connected to the computer and restart the computer. Hold down the "option" key as it reboots until a boot option menu shows up.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.