Ga door naar hoofdinhoud

Stap 1 vertalen

Stap 1
Remove the spout by pressing the button on top and sliding it towards you. Unscrew the two PH#1 screws on the back of the spout. The spout halves should now separate easily but light prying might be necessary.
  • Remove the spout by pressing the button on top and sliding it towards you.

  • Unscrew the two PH#1 screws on the back of the spout.

  • The spout halves should now separate easily but light prying might be necessary.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.