Ga door naar hoofdinhoud

iMac Intel 21.5" EMC 2544 Display austauschen

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 16 handleidingen die deze stap bevatten.

Stap 19
iMac Intel 21.5" EMC 2544 Display Replacement: stap 0, afbeelding 1 van 2 iMac Intel 21.5" EMC 2544 Display Replacement: stap 0, afbeelding 2 van 2
  • While holding the display up with one hand, use the other hand to unplug the display power cable. Make sure that you pull the cable out from the plastic tab, and not by pulling on the color wires.

  • Lift the display up enough to have easy access to the connector, but not so much that you stretch the cables and stress their connections (about 8").

Während du das Display mit einer Hand nach oben hältst, trenne mit der anderen Hand das Stromkabel des Displays. Achte darauf, dass du das Kabel nur an der Plastiklasche herausziehst, und nicht an den farbigen Drähten.

Hebe den Display nur so weit an, dass du genug Platz hast, um an den Anschluss zu kommen, jedoch nicht so weit, dass du das Kabel dehnst und den Anschluss beanspruchst (~20cm).

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.