Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 34 handleidingen die deze stap bevatten.

Stap 2
Unplug the left speaker cable by pulling it straight up out of its socket on the logic board. De-route the cable from the gap between the hard drive and logic board. If the gap between the hard drive and logic board is too narrow for the speaker cable, disconnect it and leave the cable in place.
  • Unplug the left speaker cable by pulling it straight up out of its socket on the logic board.

  • De-route the cable from the gap between the hard drive and logic board.

  • If the gap between the hard drive and logic board is too narrow for the speaker cable, disconnect it and leave the cable in place.

Disconnetti il cavo dello speaker tirandolo direttamente dalla sua porta sulla scheda madre. Stai attento a sfilare il cavo rimanendo in direzione dell'asse della presa.

Sfila il cavo dalla fessura tra l'hard drive e la scheda madre.

Se la fessura tra hard drive e scheda madre è troppo sottile per il cavo dell'altoparlante, disconnettilo e lascia il cavo dov'è.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.