Ga door naar hoofdinhoud

スクリーンの取り外し方法

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 5 handleidingen die deze stap bevatten.

Stap 17
Screen Removal, Disconnect the battery: stap 0, afbeelding 1 van 2 Screen Removal, Disconnect the battery: stap 0, afbeelding 2 van 2
Disconnect the battery
  • Use the pointed end a spudger or a clean fingernail to pry the battery connector up from its socket on the logic board.

  • Try not to damage the black silicone seal surrounding this and other board connections. These seals provide extra protection against water and dust intrusion.

  • Bend the connector slightly away from the logic board to prevent it from accidentally making contact with the socket and providing power to the phone during your repair.

スパッジャーの先端もしくは清潔な指先で、ロジックボード上のソケットからバッテリーコネクタをこじ開けて外します。

このボードや他のボードコネション周辺に付いている黒いシリコンシールを破損しないようにご注意ください。このシールは防塵防水性能を補強しています。

コネクタをロジックボードから少し離して曲げてください。修理中に誤ってソケットに接触してしまい、デバイスに電源が供給されるのを防ぎます。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.