Ga door naar hoofdinhoud

iPhone 13 Pro Max 屏幕替换前提指南

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 5 handleidingen die deze stap bevatten.

Stap 6
Screen Removal, Insert an opening pick: stap 0, afbeelding 1 van 3 Screen Removal, Insert an opening pick: stap 0, afbeelding 2 van 3 Screen Removal, Insert an opening pick: stap 0, afbeelding 3 van 3
Insert an opening pick
  • Apply a suction handle to the bottom edge of the phone, while avoiding the very edge of the glass.

  • Pull up on the suction cup with firm, constant pressure to create a slight gap between the screen and the frame.

  • Insert an opening pick into the gap under the screen's plastic bezel.

  • The watertight adhesive holding the screen in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.

在屏幕的底部边缘使用吸柄,同时避开玻璃的最边缘。

用牢固、恒定的压力拉起吸盘,在屏幕和外边框之间形成微小的间隙。

将屏幕固定到位的粘合剂非常牢固; 最开始打开一个缝隙时需要很大的力气。 如果很难创造出来缝隙,请施加更多的热量,并轻轻地上下摇动屏幕以削弱粘合剂,直到你创造出足够的缝隙来插入撬片。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.